Lifting operations basics: Tugger winch checks, banksman, rigger, and manriding overview

Apuntes

TUGGER WINCH LIFTING OPERATION - Before Use The following checks should be made before using any tugger winch: • There is enough wire on the drum. (Always leave a minimum of five wraps on the winch drum.) • The wire is evenly and tightly spooled with no apparent defects or damage. Winch drum guards are in place. • Control levers are clearly marked “Up” and “Down.” Tugger brake is operational and hoist controls return to neutral when released. • Load weight is within the SWL of the tugger. • Lift plan for a simple or complex/specialized lifting operation has been performed and reviewed. • TUGGER WINCH LIFTING OPERATION - During Use Only trained and authorized personnel may operate tugger winches (Refer to Section 4.1) and must ensure the following is adhered to: • Personnel are standing clear of all wire, ropes and moving equipment. • Direct full attention to the lifting operation. • Maintain clear visual contact with the lifting operation. If this is not practicable, a banksman must be deployed. • Stand on the correct side of the tugger when operating the controls. • Never leave the winch running unattended. • Never touch the wire by hand. ISSUE NO: 01 REVISION NO: 01 PAGE OF REVIS...